S series VP

The S series pumps are self-priming centrifugal pumps with an open impeller, providing a large free passage for solids. This makes them suitable for handling wastewater, corrosive and viscous liquids, suspended solids, abrasive particles and liquids containing air bubbles. A key advantage of this type of pump is that it does not need to be submerged. The maximum suction lift depends on the physical properties of the liquid being pumped and can be up to 8 metres. Also available with ATEX certification.

Versions

The Victor Pumps S series is available in stationary and mobile versions. The stationary versions range from a compact monobloc unit to a classic configuration with a foundation plate or tank frame. The mobile versions are available on a transport frame, trolley, trailer or skid, making them ideal for temporary or emergency applications.

Expert advice
Request a quote
brand-img-Victor Pumps
S series VP
Product
S serie Victor Pumps
Impeller type
Open
Maximum capacity
600 m³/h
Maximum suction lift
8 m
Maximum head
60 mwc
Brand
Victor Pumps
Application
Wastewater, Chemical industry, Industrial installations, Refinery, Slurry & sand extraction, Water treatment

Standard materials

  • Cast iron
  • Ductile cast iron
  • Stainless steel
  • Bronze
  • Aluminium
  • On request: hybrid material combinations or reinforced versions for handling highly abrasive particles
Want to find out more about this product?
Catalogue S series VP

The self-priming pump removes all air from the suction line. The pump casing must be filled with water.

A. The rotating impeller creates a vacuum, causing air to be drawn in and mixed with the liquid in the pump casing.

B. The air-liquid mixture is conveyed to the discharge side, where the air is expelled through the discharge connection and the liquid returns to the suction side for reuse.

C. The high suction connection retains sufficient liquid in the pump casing for repeated priming. The non-return valve prevents backflow and shortens the priming time.

Advantages

Why choose the S series VP

Optional ATEX certification 
Available in ATEX-certified versions for zones 1 and 2, allowing safe use in potentially explosive atmospheres.
Highly wear-resistant
The S-series pumps are fitted with a heavy-duty open impeller and wear plate, specially designed for abrasive applications and the passage of solids. Available on request with a cutting device for soft solids.
Fast self-priming
The S-series pumps do not need to be submerged in the liquid and can be installed above, beside or below the liquid level. The design ensures fast self-priming even when the suction line is empty.

Applications

Industrial applications

Wastewater
Industrial installations
Chemical industry
Slurry & sand extraction

See also

Recently viewed by you