TB, MH, PS, PD and TS series DP

The DanPumps drainage, sand and slurry range consists of:

Lightweight, easy to handle submersible pumps for clean to lightly contaminated water. These pumps have a strainer and a vortex impeller. Ideal for emergencies, surface water, and emptying or keeping dry wells and cellars. Optionally supplied with a float switch for automatic operation.
Drainage pumps in cast iron, aluminium or stainless steel, fitted with a strainer and suitable for clean and contaminated liquids. The strainer protects the pump against damage and blockage by oversized solids.
Deep well dewatering pumps, the MH series. These have closed impellers and a strainer. They still handle solids, but the passage is limited to the mesh size of the strainer. These pumps deliver up to 20 bar.
Sand and slurry pumps with agitator, the workhorses of the range. They handle sand and slurry with a high solids content, up to a slurry density of 1.4 kg/l. Settling and compaction are no problem: the agitator mixes the water with sand into a pumpable slurry. Impeller, agitator and inlet plate are made of extremely wear-resistant high chrome steel.

Expert advice

Specifications

Technical specifications

Product

TBZ, TBA, TBD, TBS, MH, PS, PD, TSA, TSM serie DP

Impeller type

Closed, Vortex, Semi-open

Maximum submersion depth

30 m

Maximum capacity

408 m³/h

Maximum free passage

30 mm

Maximum head

200 mwc

Maximum temperature

40°C

Maximum motor power

110 kW

Brand

DanPumps A/S

Application

Wastewater, Dredging industry, Construction & dewatering, Industrial installations, Slurry & sand extraction, Water treatment

Materials

Construction materials

Materials

Pump casing and motor housing: cast iron, die-cast aluminium on the portable models, stainless steel AISI 304 on the TSS series
Impeller: high chrome alloy, ductile iron or stainless steel AISI 304, depending on the series
Agitator: high chrome alloy, stainless steel on the PS series
Inlet plate: ductile iron, high chrome alloy or cast iron on the TBS series
Shaft: stainless steel AISI 420
Mechanical seal: silicon carbide, configuration depending on series and power rating

Want to find out more about this product?

Catalogue Drainage, Sand and Slurry Pumps DP

Range

TBZ: 50TBZ1.5, 80TBZ1.5, 50TBZ2.2, 80TBZ2.2, 50TBZ3.7, 80TBZ3.7, 100TBZ3.7, 80TBZ5.5, 100TBZ5.5, 100TBZ7.5, 150TBZ7.5, 100TBZ11, 150TBZ11, 100TBZ15, 150TBZ15

TBZE: 50TBZE1.5, 80TBZE1.5, 50TBZE2.2, 80TBZE2.2, 50TBZE3.7, 80TBZE3.7, 100TBZE3.7, 80TBZE5.5, 100TBZE5.5

TBA: 50TBAM1.5, 80TBAM1.5, 50TBA1.5, 80TBA1.5, 50TBA2.2, 80TBA2.2, 80TBA3.7, 100TBA3.7, 80TBA5.5, 100TBA5.5, 50TBAME1.5, 80TBAME1.5, 50TBAE1.5, 80TBAE1.5, 50TBAE2.2, 80TBAE2.2

TBD: 50TBD1.5, 80TBD1.5, 50TBD2.2, 80TBD2.2, 80TBD3.7, 100TBD3.7, 80TBD5.5, 100TBD5.5

TBDE: 50TBDE1.5, 80TBDE1.5, 50TBDE2.2, 80TBDE2.2, 80TBDE3.7, 100TBDE3.7, 80TBDE5.5, 100TBDE5.5

TBS: 80TBS4, 100TBS6, 150TBS9, 150TBS11, 200TBS15, 200TBS22, 200TBS30, 200TBS37

MH: 80MH11, 100MH22, 100MH30, 100MH37, 150MH22, 150MH30, 150MH37, 150MH45, 150MH55, 150MH75, 150MH90, 150MH110, 200MH37, 200MH45, 200MH55, 200MH75, 200MH90, 200MH110

PS(M): 50PS(M)0.4(F), 50PS(M)0.75(F), 80PS(M)0.75(F)

PD(M): 50PD(M)0.55(F)

TSA: 50TSA0.48(F), 50TSA0.75(F)

TSAE: 50TSAE0.48, 50TSAE0.75

TSM: 50TSM0.25(F), 50TSM0.4(F), 50TSM0.75(F), 50TSM1.5(F), 80TSM1.5(F)

TSM(G): 25TSM0.48(G), 50TSM0.75(G)

TSS: 50TSS1.5, 80TSS1.5, 50TSS2.2, 80TSS2.2, 50TSS3.7, 80TSS3.7, 100TSS3.7, 80TSS5.5, 100TSS5.5, 100TSS7.5, 150TSS7.5, 100TSS11, 150TSS11, 50TSS1.5(F), 80TSS1.5(F), 50TSS2.2(F), 80TSS2.2(F), 50TSS3.7(F), 80TSS3.7(F), 100TSS3.7(F), 80TSS5.5(F), 100TSS5.5(F)

Advantages

Why choose the TB, MH, PS, PD and TS series DP

Extensive product range

The full product range offers optimal solutions for clean water, water containing solids and heavily contaminated slurry applications.

European quality from Denmark

DanPumps is a wholly Danish-manufactured brand, based in Haderslev, Denmark. The pumps are characterised by their high quality, fast delivery times and competitive prices.

Delivery from stock

DanPumps keeps virtually all pumps from its drainage, sand and slurry ranges in stock. In the unlikely event that a model is out of stock, delivery times are usually only 2–3 working weeks. This means we always have a quick solution for your application.

Applications