Products

Submersible mixers for optimum mixing, homogenisation and agitation in municipal and industrial wastewater treatment plants.
GM – Submersible mixer with cast iron motor housing and AISI 316 stainless steel impeller.
XM – Fully AISI 316 stainless steel version with Viton O-rings.

Submersible mixers with a three-bladed propeller and gearbox for liquids and slurries containing fibres and solid particles. High thrust with low energy consumption.

GR12 series – Mixer with a three-bladed propeller and gearbox for liquids and slurries containing fibres and solid particles. High thrust with low energy consumption.

Liquid-ring vacuum pump with discharge valves.
VSB — Valve pump with a distribution plate made of stainless steel or ductile cast iron.
VSL — Lantern-bracket pump with an IEC-standardised motor for easy maintenance.
VSM — Monoblock pump with an IEC-standardised motor for easier maintenance.

Self-priming submerged aerator that uses the Venturi effect to inject air into the wastewater in the form of fine bubbles. Aerates and homogenises simultaneously. Easy to move; no civil engineering work required.

Industrial submersible pumps
Available in various material options and a wide range of hydraulic variants. Characterised by their robust design and oversized motors ranging from 0.5 kW to 350 kW, with 2, 4, 6, 8, 10 and 12 poles, at 50 and 60 Hz.

Self-priming centrifugal pump for clean to moderately contaminated liquids containing solid particles.

Executions

GS3 / GS4 / GS6 / GS8 / GS10

Centrifugal pumps with a closed impeller in accordance with ISO 2858 and ISO 5199.
RDB – Free-standing frame, oil-lubricated
RDL – Lantern bracket with flexible coupling
RDM – Monoblock with B5 electric motor

SR Vertical column pump

Version A — lubrication with the pumped fluid
Version B — lubrication with external flushing fluid, for dirty, abrasive or sticky fluids
Version E — lubrication within the column, for corrosive fluids containing solid particles

SR Cantilever pump

Standard installation – On top of the sump/tank, without level control.
Installation with suction pipe extension – On top of the sump/tank, pumps down to 5 metres below the pump casing.
External installation – Next to the sump/tank, without level control

The Pioneer GT series is a wet self-priming pump and the heavier-duty version of the GS series.

Executions

GT3 / GT4 / GT6

An aeration system with a submersible pump and ejectors that simultaneously aerates and mixes using the Venturi effect. Quiet, no aerosol effect, easy to install.

Centrifugal pumps with open impeller in accordance with ISO 2858 and ISO 5199.
RGB – Free-standing frame, oil-lubricated
RGL – Lantern bracket with flexible coupling
RGM – Monoblock with B5 electric motor

Traditional Plate Heat Exchangers

Efficient and Reliable for Standard Duties.

SonFlow’s traditional gasketed plate heat exchangers are the ideal choice for a wide range of applications across various market segments.

Submersible cutter pumps
Faggiolati's submersible cutter pumps are in a league of their own when it comes to quality, yet remain competitively priced compared with rival pumps. Depending on the contamination, you can choose from the T, P or J series. The T series is available entirely in AISI 316L stainless steel, for wastewater that is too aggressive for cast iron.

Mobile submersible aerator which, using a DUPLEX impeller and an external blower, simultaneously aerates and mixes sludge and wastewater. 

The Pioneer Prime series comprises vacuum-assisted self-priming centrifugal pumps featuring the UltraPrime™ system.

Versions

Solids Handling / Clear Liquids

Centrifugal pumps with channel impeller in accordance with ISO 5199.
RBB – Free-standing frame, oil lubrication
RBL – Lantern bracket with flexible coupling
RBM – Monoblock with B5 electric motor

Wastewater pumps
The S-WP series combines high efficiency, intelligent design and practical features. From light industrial wastewater to heavy-duty wastewater applications in urban and industrial settings. Easy to maintain, suitable for wet or dry installation, and available in horizontal and vertical configurations.

Free Flow Plate Heat Exchanger

For fibres, particles and highly viscous products.
SonFlow’s new Free Flow plate heat exchanger series is ideally suited for difficult media containing solids, particles, fibres, and high viscous products 

Vertical cantilever slurry pump
For tank and floor cleaning in mining and mineral processing. Available as vMAX (metal) or vMAX-R (rubber-lined).

vMAX — Metal version for large solids and highly viscous slurries
vMAX-R — Rubber-lined version for corrosive slurries containing finer solids

Centrifugal pumps with vortex impellers in accordance with ISO 5199.
RCB – Free-standing frame, oil lubrication
RCL – Lantern bracket with flexible coupling
RCM – Monoblock with B5 electric motor

The S-series from Victor Pumps comprises self-priming centrifugal pumps with an open impeller and a large free passage. Available in stationary and mobile versions

Piston pumps
The Liverani piston pump is a double-acting pump with a single piston (S75/S75-S) or twin pistons (GS80), particularly suitable for transferring residual water from industrial processes or dreg liquids under pressure.

Drainage, sand and slurry pump
DanPumps offers a wide range of drainage, sand and slurry pumps, designed to meet a variety of pumping requirements. Whether for construction sites, mining and industry, or the pumping of contaminated water, our pumps provide efficient solutions.

Submersible drainage pumps
Franklin Electric’s FDX and FDP series are drainage pumps includes submersible pumps for the removal of clear and turbid water. These electric submersible pumps are suitable for a wide range of applications in the residential, commercial, industrial, construction and mining sectors.

Self-priming centrifugal pump with a removable volute, which is available in a hardened version.

Permanently Sealed Brazed Heat Exchangers
SonFlow’s efficient brazed heat exchangers (SFB) are permanently sealed heat exchangers suitable for a wide variety of applications across numerous market segments.

Submersible wastewater pumps
Franklin Electric supplies submersible pumps for waste water and sewage, for residential, municipal and industrial applications. From compact pumps in rolled stainless steel to grinder pumps with a cutting unit in hardened stainless steel, with a free passage up to 80 mm.

Vertical immersible pumps FPX
The FVT series from FPX consists of vertically suspended pumps with diffuser, available as single-stage or multistage pumps.

Open-impeller centrifugal pumps.
HGA – Monoblock with hygienic connections in accordance with DIN 11851 and a standard B5 electric motor
HGM – Monoblock with flanged connection in accordance with EN 1092-1 and a standard B5 electric motor

Progressive cavity pumps
The PCM EcoMoineau™ MX is an innovative pumping solution, in the form of a progressive cavity positive displacement pump, which makes maintenance quicker, simpler and more cost-effective. 

Centrifugal pumps with vortex impeller.
RSA – Monoblock with hygienic connection in accordance with DIN 11851 and standard B5 electric motor, for the food industry
RSM – Monoblock with flanged connection in accordance with EN 1092 and standard B5 electric motor

Professional series of lightweight stainless steel submersible pumps. Standard material specification: 304 stainless steel. 316 stainless steel is available as an option for some series. Series ranging from those designed for heavily contaminated waste water containing solids to those for clean water.

VALISI peristaltic pumps in three series for low, medium and high pressure. Seal-less, dry-run-proof, self-priming and reversible. 

Centrifugal pumps with channel impeller in accordance with ISO 5199.
REB – Free-standing frame, oil lubrication
REL – Lantern bracket with flexible coupling

PCM peristaltic pumps for pumping and dosing abrasive, corrosive and sensitive liquids.
Comprising 3 series:

Delasco DX / Delasco Z / Delasco PMA